Securisation harnais insta360 harness security
Print Profile(1)
Description
Does your chest harness strap loosen on its own?
Have you nearly lost your camera because of a temperamental strap?
Take no more chances!
Print this strap blocker, specially designed to prevent the strap from coming loose. Simple, effective, and indispensable for securing your equipment during your adventures!
🔧 Installation note:
The fit is intentionally very snug to ensure a secure hold. You will need to bend the small tabs slightly to insert the blocker correctly. I recommend starting with the side that fits deepest into the piece.
👉 If your harness is new, it should be strong enough to withstand the process. However, I cannot be held responsible for any breakage: installation is at your own risk.
----------------------------------------------------------------------------------------------------------------------------
Does your chest harness strap loosen on its own?
Have you nearly lost your camera because of a temperamental strap?
Don't take any chances!
Print this strap blocker to prevent your harness strap from loosening. Simple, effective, and essential for securing your gear on the go!
🔧 Installation note:
This part is designed for a tight fit. You will have to carefully bend the small tabs to insert the blocker correctly. I recommend starting with the deepest side.
👉 If your harness is new, it should be sturdy enough to withstand the insertion. However, I cannot be held responsible for any breakage—install at your own risk!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)