6s balanced charger_6S主动平衡充
Print Profile(2)
Description
6S balancer charger, incorporating a protection board and an active balancing board, with total voltage display.
Requires a 25.2V 6S standard 5.5-2.5mm round connector charger.
Under normal conditions, the battery will remain in self-balancing mode even when connected without a charger.
In addition to the included components, you will need twelve M3*10 pan head screws, two M2.5*10 (or shorter, but not longer) screws, and several 2.5mm wide cable ties (narrower is acceptable, wider is not),one XH2.54 7-pin connector cable for the balance connector
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)