Retro Vintage Inspired Mid Century Bird House
Print Profile(1)
Description
This model can be printed without the need for an AMS and requires NO GLUE or HARDWARE to firmly secure itself together.
This bird house was modeled after the mid century / googie architecture style of the 1950's. Its one of my favorite design eras and was the inspiration for many TV shows from my youth.
Assembly is straight forward, just be sure to follow this order:
1.) Remove the pre-printed support tabs off the right and left wall (see GIF above - there are 2 per wall). Your finger nail should do it, otherwise use needle nose pliers
2.) Slide the left wall and right wall into the base
3.) Press fit the front wall (bird hole) into the right wall slot
4.) Slide the roof into both the left and right walls
5.) Insert the fireplace wall down into the base via the opening on the roof
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (39)