Print Profile(1)
Bill of Materials
- Wheel as in the given example x 2: https://www.leroymerlin.fr/produits/roulette-fixe-a-platine-diam-25-mm-82629501.html
- Screw x 4: 3mm x 10mm height
Description
I have a ROWA garden table which is quite heavy, so I need help to move it.
To make it easier to move on my own, I decided to add wheels. I designed a custom support for commercial wheels that can be seamlessly slotted into the table legs.
As a result, by fitting two wheels on one side, I can slightly lift the other side and effortlessly move the table whenever I need.
The wheel is not 3D-printed. Instead, you should use a commercially available product, such as the one shown below, which has a wheel diameter of 25 mm and a base measuring 19 mm × 41 mm.
I printed it using translucent PETG, and it turned out to be very robust. I’ve provided a version with 100% infill, but I also tested a version with gyroid infill (although I haven't shared the print profile for that one). Both versions are very similar in strength—the only noticeable difference is in their appearance.
License
Comment & Rating (0)