One Piece - Luffy Gear 5 VS Lucci - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 181.48x102.12mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm

This print uses 3 unique filaments

Swap Instructions:
    Start with White
    At layer #7 (0.64mm) swap to Grey
    At layer #9 (0.8mm) swap to White
    At layer #11 (0.96mm) swap to Black for the rest.