Fuchs 301 crane H0

Fuchs 301 Crane

This is a very famous German machine from “IG-Fuchs”.   Build as of 1957 there are 1000's of these around and they exsist in different versions.

I choose to make the version with a hook, but you could draw up a bucket to. You need a short piece of 1mm wire for the hinge between the crane arm and the chassis.

Pictures are from the prototype, in the meantime I beefed up some of the fine details to allow to easier printing and processing.

scale 1:87 for H0

Originally designed for resin printer but ive made sure the model prints relatively well on my A1 mini.

Printed in matte gray 0.2 mm nozzle and 0.08 mm layer height. Printed with support.