Storage Box Hardware Toolbox Expandable Tool Box Stackable and Interlocking
Print Profile(2)
Description
Boost Me (for free)
Creation is hard, please support me
Updated 12.30. Changed the supported part of the top cover to a single large flat layer. H2D can use dual-material printing. For other printers, the support surface will also be better
This is an expandable parts box with 6 storage compartments, including small and large grids for convenient storage. The bottom has enough space for tools such as scissors, pliers, and tweezers. V1.0.0 requires heat-set inserts, making it more robust. V1.1.0 uses self-tapping screws directly, making installation easier. V1.1.0 requires self-tapping screws, but M3*40 screws are not that long. You can use regular socket head screws instead
Close the chamber door during printing, as the printed part is relatively large and prone to warping. The author printed with PETG at a chamber temperature of around 45°C, with no warping. However, internal stress is too high during cooling after printing. The bottom is prone to deformation after printing. It is recommended to immediately remove the print from the build plate after printing and place it upside down on the build plate. Close the chamber door and wait for the printed part to cool naturally
I have also designed other practical models, download links can be found here
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)