Print Profile(2)
Description
Overview
This elegant diamond-pattern soap bottle is a stylish upgrade for your bathroom or kitchen. Its clean lines and sharp, modern design bring a touch of luxury to any countertop.
The model is designed to be watertight, easy to print, and completely support-free. It fits most standard foaming pump heads, but please read the note below before printing the full model.
It is capacity: Approximately [ 360ml ]
The recommended soap-to-water ratio: 50% water to 50% soap (depending on the thickness of the soap)
Compatibility Notice
⚠️ Important: Before printing the full bottle, please print the test screw neck I uploaded to make sure it fits your foaming pump correctly. This will save you time, material, and frustration in case your dispenser thread is different.
Recommended Print Settings
- Infill: 20% simple Grid
- chosen for balance between strength and material usage
- Walls: 3 walls
- You may use 4 walls for even more water tightness
- Top & bottom shell layers: 5
- You may use up to 8 layers for even more water tightness
- Supports: Not needed – the model was designed to print clean without support
Post-Printing
- Always do a leak test before using it with liquid soap
- Just fill it with water and leave it on a tissue paper overnight to check
- I tested it with foaming pumps from Aliexpress and (Rossmann EU) – both fit perfectly.
I personally recommend the Aliexpress version due to its better quality.
Material & Filament Notes
- Tested Filament: PLA-silk
- My PLA-silk bottle has lasted over 5 months with daily use, no leaks so far
- Recommended Filament: PETG
- PETG is more suitable long-term since it’s food-safe, stronger, and better with water exposure
- Avoid: ABS or any similar material that are not food safe
- Not recommended PLA: PLA generally can't handle long water exposure since it tends to absorb moisture and can swell, weaken, or crack over time thus loosing it is water tightness.
Support the Project
If you find this design useful and would like to support my work, consider buying me a coffee
Your support helps me keep designing, and sharing my ideas.
If you print the bottle, I’d love to hear how it worked out for you — feel free to share pictures or feedback. :)
License
Comment & Rating (4)