Search models, users, collections, and posts
Sakura CardCaptor Bookmark
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
47 min
1 plate
Open in Bambu Studio
Boost
30
66
2
1
33
24
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 169.04x441mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Pink Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Pink
At layer #23 (1.92mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (2)