Arne

cover

1000019848.jpg

1000019832.jpg

1000019847.jpg

1000019837.jpg

1000019853.jpg

plate_1.png

2025-06-01_773a3cb657ee1.jpg

EU format (85x55mm), 0.08mm layer, 2 walls, 15% infill

2025-06-01_773a3cb657ee1.webp

Print profile for American/Canadian business card format (3.5x2in)

American/Canadian 3.5x2in, 0.08mm layer, 2 walls, 15% infill

Card Holder

Card Holder Base (with Text)

plate_2.png

Card Holder Base (without Text)

plate_3.png

Ooze Control Creations

4E980546-7E90-472C-9959-B58320FD9097.jpeg

IMG_3439.jpeg

IMG_3433.jpeg

Profile Plates.PNG

I made a profile with the North American sized Pelvis business card holder parts, since the other uploaded profile does not have the correct pieces inside. &nbsp;This profile includes an option to print the base with or without text, but text is generic and needs editing if its the option used. For the base option with text, open up this .3MF profile in your slicer software, right click on the text in the object menu, and select “Edit Text” to change the characters from the current generic &#34;TEXT&#34; that I included. For the base option without text, just print the appropriate plate where its not included (each plate is labeled). I printed the option with text on my A1 in PLA (I personally did PLA metal for the text), and utilized 2x M4x30mm stainless steel machine screws (standard 0.7mm pitch) to put the assembly together (no additional hole drilling required with the mods included in this profile).&nbsp;Other part-specific settings used in this profile:&nbsp;Card Holder Pelvis (Generic PLA on Textured PEI Plate):<ul><li>0.16mm base layer height, 0.12mm layer height for layers after, with adaptive layer height turned ON (and smoothed back out with radius)</li><li>3x wall loops</li><li>Concentric top surface pattern</li><li>12% gyroid sparse infill</li><li>Only one wall on top surfaces turned OFF</li><li>Default tree supports ON, on build-plate only, removing small overhangs ON, threshold angle of 28°, 0.145mm top Z-spacing</li><li>Outer brim only turned ON, but separated a bit further from the part (so it easily comes off after printing)</li><li>I scaled the entire part to 102%, so it has room to fit a standard 50.8mm wide card (opening for cards is ~51.8mm wide after my scaling)</li><li>I included some negative part cylinders and cones to help the M4 screws start self threading-in a little easier</li></ul>Bases (Generic PLA on Textured PEI Plate):<ul><li>One plate option with Text (needs to be edited in Slicer), another plate option without it</li><li>0.16mm layer height for all layers</li><li>2x wall loops</li><li>Monotonic (default) top surface pattern</li><li>10% gyroid sparse infill , 100% concentric infill in text object</li><li>Only one wall on top surfaces turned OFF (except for on the text object)</li><li>Precise walls turned ON for the text object</li><li>No supports or outer brim</li><li>I scaled the X and Y dimensions (left Z alone) to 102% to match the scaled-up Pelvis dimensions (which was to better fit the NA sized cards)</li><li>I included some negative part cylinders and cones to help the M4 screw heads and shanks fit in the base part a little better</li></ul>

NA Sized Card Holder (with tolerance mods, with or w/o text)

Azrael

Gridfinity pelvis

<h2>Pelvis</h2><boostme><boosttitle>Boost Me</boosttitle></boostme><h2> Business Card holder</h2>Ideal business card holder for medical professionals who specialize in the the Pelvic area like (uro)gynecologists or physical therapists. It was designed to vertically hold business cards. Print profiles and STLs are provided for both European (85x55mm) and American/Canadian (3.5x2in) business cards.<figure class="image image_resized" style="width: 49.28%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001476449/design/2025-06-01_edd870e6f4fdd.png"></figure>&nbsp;The provided profiles print the base and holder separately, because removing the supports is not easy with the base attached. The base is attached using a self-tapping countersink M4 screw. However, a STL file where base is attached to be holder is also provided.&nbsp;Remixed from <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/526611-gridfinity-pelvis">https://makerworld.com/en/models/526611-gridfinity-pelvis</a> (which is itself a remix of <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:783837">https://www.thingiverse.com/thing:783837</a>)

Pelvis Business Card Holder

ASIA

Print Profile(3)

Description

Pelvis

Business Card holder

Comment & Rating (21)

This remix is based on

License

Related Models