Print Profile(1)
Bill of Materials
_-_YE002.png)
Description
Cozy Lotus Shoji Lamp
This lamp was inspired by the traditional Japanese Shoji lamps and is ornamented with the symbol of the lotus flower.
The assembly of the lamp works without glue or screws all parts are joined together which allows a quick and easy assembly.
The lamp kit from the Maker Store is used as the light source.
10W and 40W Version:
If you have the 40w version of the H2D you can laser cut all wooden parts from 9mm thick plywood.
For the 10W version, I would recommend laser cutting all wooden parts 3 times from 3mm plywood and then gluing them together. The result will be the same.
Boost Me (for free)
If you like my work and want to support me, a Boost is greatly appreciated!
Membership
Interested in a commercial license? Check out my membership!
Once all the parts have been laser-cut, the paper is glued to the side parts.
I used a simple glue stick for this and made sure to only dab the stick so that no glue smudges.
The paper can also be cut out with the laser or by hand, 1x 123x123mm and 4x 123x148mm.
The lamp set is inserted into the lower part and fixed in place with a little hot glue.
All parts should fit together smoothly. Follow the pictures.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)