The Moominhouse, or Moominlighthouse! NO AMS! - Free 3D Print Model

Search models, users, collections, and posts

Viksangen3D

Miniatures>Architecture

IP Report

Print Profile(1)

All

X1 Carbon

H2D

P1P

P1S

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

12.9 h

5 plates

5.0(10)

Open in Bambu Studio

Boost

231

157

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

PLA Basic

PLA Basic

Description

I present to you, The moomin(light)house!

This is a model of the moominhouse that either can serve as a decoration or a nightlight for the small ones. Paired with an IKEA Strimsäv (strimsav) led light the house lights up in the dark. If you dont have or want to buy the LED from ikea there should be no problem fitting a led strip instead.

The model is around 320mm high when it is fully assembled and the housebody itself is 120x225mm so unfortunately it doesnt fit the A1 mini. But all the other parts fits the mini.

You may have to trim the decor pieces some with either sandingpaper or maybe a deburring tool. All the decor and the door needs to be glued in place The windows should just snap in place but I recommend some glue to make them stay in place. I chose not to glue the roof but if you want to you can do that.

I had alot of trial and error with this model since Im not a fusion360 expert just yet. Although I had alot of fun making it and my 7yr old daughter loves it.

Im sure improvements can be made but please take this in consideration before you complain. On the other hand I much appreciate constructive criticism.

All the filaments Ive used are Bambu PLA Basic except the white which is Eryone PLA+.

Please send me a message if you have any questions!

Boost Me (for free)

I would very much appreciate if you gave me a boost if you like the model!

Thanks!

Comment & Rating (32)

@monsov

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

this printed perfect. and it so cute. I made the two first layers of windows with transparent filament.

The profile uploader has replied

@Tomas1988

Nice! Looks good with transparent filament for the windows. I never thought about that, its a nice touch! Glad you like it and thanks for the rating 😊

@Danny_Dowding

Printed at 80% as I was running low on blue (and black door instead of brown) but came out pretty well (the artifacts are my fault not the file) windows were interference fit but the rest needed glue. Really good file, thanks.

The designer has replied

@Tomas1988

Nice to know it works to scale some 😊 looks cool with black door! Thanks for sharing and merry christmas!

@Danny_Dowding

Replying to @Tomas1988 :

Thank you, you too

@mylosh80

Boosted

Great model, the roof texture was perfect, couldn't pick that it was a print at all! Haven't received my IKEA light in the mail yet, so chucked some led tealights in for the meantime. Thanks for the print!

GIF

The designer has replied

@Tomas1988

Thank you! Looks real cool with the tealights too though, and all the little figurens! Nice work 😊

@MotoDC

Boosted

Just printed this for our house, it was fun! kinda wish it was a multi colour model (mostly because I’m lazy 😂). It was larger than I expected, but it was a pleasant surprise.

The designer has replied

@Tomas1988

Haha! Well I thought about making it one piece and multicolour but I would have to make it smaller and it would have been alot of wasted filament. But Im glad you like it anyway, thank you! =)

@MotoDC

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

The profile uploader has replied

@Tomas1988

Looks really good! Thank you for sharing! 😊

@MikaSnufkin

I find it so sweet and cozy. Only the veranda is missing, but that encourages restarting Fusion 😇

Show original

@SpritelyFrog

Print Profile

0.2mm layer, 2 walls, 10% infill

This is outstanding! Absolutely love it. Thank you so much for creating and sharing this.

The profile uploader has replied

@Tomas1988

Thank you for printing and rating it! Im glad you like it 😊🌟

@SpritelyFrog

Replying to @Tomas1988 :

It made a Swedish person who grew up with the Moomins very happy! I'm going to try printing some silhouettes of Moomin characters to put in the window like I saw someone else already did. Best thing I've printed so far! (I'm new to 3D printing - less than a month)

@ankeanke1212

Print Profile

0.2mm layer, 2 walls, 10% infill

I really enjoyed this. Big thanks for a well designed print, that i can blame the kids for my own need to have :) Good work with the print profile and easy to build as well

The profile uploader has replied

@Tomas1988

Thank you! It makes me happy to hear that it was easy to build and that your satisfied with the model 😊

@Caminich4

Print Profile

0.2mm layer, 2 walls, 10% infill

Nice 👍

(Edited)

The profile uploader has replied

@Tomas1988

Thanks! May I ask why you rated it 4/5? What could be better? 😊

@user_1292132042

Awesome

The designer has replied

Show original

@Tomas1988

Thanks =)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.