Decorative Heart Box with Tight-fit Lid - Free 3D Print Model

Search models, users, collections, and posts

Boodl3D

Household>Festivities

IP Report

GIF

Print Profile(4)

All

P1S

P1P

H2D Pro

H2S

P2S

H2C

X1 Carbon

X1E

H2D

X2D

A2L

A1 mini

[AMS] 0.2mm layer, 2 walls, 10% infill

Designer

3.5 h

1 plate

4.9(99)

A1Mini 2 plates

Designer

4 h

2 plates

4.8(6)

Plain Lid with Heart Box

Designer

2.4 h

1 plate

5.0(2)

57% SCALE, 1HR 39 MIN, 0.16mm layer, 2 walls, 10% infill

1.6 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

483

1127

167

983

660

Released

Description

The last heart box you will ever need! Designed to have a tight fitting lid, it makes a great gift box without needing to worry about the lid slipping off. With the fit of the lid, you may find you need to put the lid on and off a few times, but then it should be no trouble. I added a thin shadow line around the bottom of the lid for easier opening, enough space for a fingernail to slip under and pull it off.

Get creative with the colors! The cover photo taken was using a rose gold silk and Bambu black PLA. I also added another photo from my various testing iterations of color combinations! Black and red and white combined makes it really POP!!

****THIS BOX PRINTS WITH THE LID FACE DOWN. IT RESULTS IN A SMOOTH SURFACE IMAGE. YOU WILL NEED TO USE 2 DIFFERENT COLORS AT LEAST TO ACHIEVE THE DESIGN USING THE PRINT PROFILE.****

If there is interest, I may add another version with the details able to be printed separately or with filament swap. I did upload the step file if you'd like to test it out for yourself and see if you can make single color print work out for you! Please just leave a comment expressing interest. Thank you!!!! <3

THIS VERSION IS FOR PERSONAL USE ONLY
For Commercial-use version, see listing on cults3d!