Case with bayonet lock for watchmaker tools
Print Profile(1)
Description
Hello. I enjoy changing the button cells in my watches myself. For this purpose, I recently purchased an inexpensive micro screwdriver set from Amazon. (See image) For my needs, these are perfectly adequate. It was important to me that I could change the bits.
I am quite careful with the tiny screws so as not to strip them.
Of course, this container can also be used for other micro screwdrivers. The dimensions are often similar. (≤90mm)
For this set, I have designed a container with a bayonet closure. The bits are freely accessible at the bottom of the container.
For sorting, I copied the relevant section from the Amazon product image and laminated it.
The cutout is 25mm high, with 20mm visible. Corresponding to the diameter of 97mm, the labeling is 305mm long.
You can find the corresponding file under “Documentation” as a pdf.
The bayonet closure is practical and robust. The container is designed for 13 screwdrivers and accessories.
Boost Me (for free)
Thank you!!!
Check out my other models too!
CU Neutrino28j
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)