ralf.hoerhager

cover

PXL_20231011_184128033.jpg

PXL_20231011_184142708.jpg

PXL_20231011_184137386.jpg

IMG_2830.JPG

IMG_2841.JPG

IMG_2833.JPG

IMG_2835.JPG

IMG_2843.JPG

plate_1.png

PXL_20231029_163230107-01~2.webp

plate_1.webp

Print setting <ul><li>0.24mm layer</li><li>35% infill </li><li>4 perimeters </li><li>5 top and bottom layers </li><li>material: PETG or ABS (for the body)</li></ul>I found that these settings worked best for me. Also, other materials might work better than PETG or ABS.

Sanding Block Set

plate_2.png

plate_3.png

plate_4.png

plate_5.png

PXL_20231011_184128033.webp

PXL_20231011_184137386.webp

PXL_20231011_184142708 (1).webp

Print setting <ul><li>0.2mm layer</li><li>25-35% infill </li><li>4 perimeters </li><li>3 top and bottom layers </li><li>material: PETG or ABS (for the body)</li></ul>I found that these settings worked best for me. Also, other materials might work better than PETG or ABS. &nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

All 3 Sanding blocks| 0.2mm layer, 4 walls, 35% infill

Print setting <ul><li>0.24mm layer</li><li>35% infill </li><li>4 perimeters </li><li>5 top and bottom layers </li><li>material: PETG or ABS (for the body)</li></ul>I found that these settings worked best for me. Also, other materials might work better than PETG or ABS.

Sanding Wedge Set

Variation 3 | Rounded Sanding Wedge

Sel13015

0.28mm layer, 4 walls, 100% infill

No Waste - Symmetrical Base - 55mm - 110% - (4 per sheet)

No Waste - Base Wedge - 37mm - 74% - (6 per sheet)

No Waste - Base Arc Variation - 37mm - 74% - (6 per sheet)

Max Size - Symmetrical Base - 112%

Max Size - Base Wedge - 81%

Max Size - Base Arc Variation - 80%

plate_6.png

ShopTeacher

20240405_133946_c68e18d9-5d49-4d0a-a831-29fa1e39ff30.webp

20240405_134020_d0896a99-e3f6-4a12-ac01-4977d095785a.webp

Rationale for Print Profile:&nbsp;&nbsp;If you buy sandpaper in sheet format instead of roll format, then the typical size of the sandpaper sheet is 230mmx280mm. Two of the three sanding blocks here are too large for sandpaper sheets and must be scaled down.&nbsp;&nbsp;This print profile scales each block to maximum size for typical 230mmx280mm sandpaper and offers a second size that will scale it to the largest size possible but eliminate sandpaper waste.&nbsp;&nbsp;Scale for maximum size:<ul><li>Wedge Block&nbsp; - 81%</li><li>Symmetrical Block - 112%</li><li>Arc / Curved Block - 80%</li></ul>&nbsp;Scale for maximum size with no sandpaper waste:<ul><li>Wedge Block&nbsp; - 74%<ul><li>37mm Block width</li><li>Cut paper at 38.3mm (6 even strips per sheet)</li></ul></li><li>Symmetrical Block - 110%<ul><li>55mm Block width</li><li>Cut paper at 57.5mm (4 even strips per sheet)</li></ul></li><li>Arc / Curved Block -&nbsp;<ul><li>37mm Block width</li><li>Cut paper at 38.3mm (6 even strips per sheet)</li></ul></li></ul>&nbsp;Print Settings:<ul><li>Textured Plate, 0.4 Nozzle, 0.2 Layer Heights, Classic Walls</li><li>4 Wall Loops, 5 Top Shell, 5 Bottom Shell, 15% Gyroid Infill</li></ul>

Sandpaper Sheet Scale - Max Size & No Waste

Andrii

2023-10-03_a3a89313b22de.webp

0.24mm layer, 4 walls, 35% infill

2023-09-17_74b8eb45ea3d2.webp

2023-09-17_13dc1d1a4ecf3.webp

2023-10-11_a6184ea7be9de.webp

0.2mm layer, 4 walls, 30% infill

<a target="_blank" href="https://www.printables.com/de/model/418290-sanding-wedge-v2" rel="nofollow noopener">Printables Link</a>&nbsp;General informationAs you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. &nbsp;The new design is Fully 3d printed, no bolts or nuts needed.&nbsp;Technical detailsThis sanding wedge is made for 50mm wide sandpaper. The sandpaper must be at least 310mm long for the original version and 225mm for the small version.I recommend you buy a roll of Sandpaper that already has the desired width and then cut it to length.&nbsp;Here are some I found on Amazon: <ul><li><a target="_blank" href="https://amzn.eu/d/5q3raSU" rel="nofollow noopener">Bosch DIY Sanding Roll for Metal 50mm 5m 120 Grit </a></li><li><a target="_blank" href="https://amzn.eu/d/gXm8hH8" rel="nofollow noopener">Klingspor 4224 - KL 361 JF Sanding Rolls with Fabric Backing, Brown, 50 x 25000, Packaging Unit 1 - Grain 180</a> </li></ul>&nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

Sanding Wedge V2

ASIA

Print Profile(10)

Description

Comment & Rating (462)

License

Related Models