CapIt - Sauce & Squeeze Bottle Cap
Print Profile(1)
Description
This is a simple cap designed to fit a squeeze bottle style cap. I had a squeeze bottle that I use to transfer isopropyl alcohol into other containers and lost the cap, so made one.
Design considerations
The cap tapers outward from a tip internal diameter of 5.5 mm to 9.5 over a distance of 17 mm creating a wall angle of approx 6.6 degrees. You can scale the X/Y and Z to meet your needs. The wall thickness is 1 mm.
By changing Z more or less than X & Y you can adjust the angle of the taper to better fit your needs.
My squeeze bottle includes a raised ring - yours probably does too - you want the cap to go over this ring as it creates a seal.
There are two designs
- Plug cap - Includes a 2.4 mm high ‘plug’ with a diameter of 2.6 mm in the center of the cap designed to plug the tip.
- Basic cap - Deletes the plug. Square inside end.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)