Candy & Chocolate Dispenser Fully 3D Printed
Print Profile(5)
Description
Fully 3D-printed candy dispenser in unique design
- Can be combined in many great colors and with different labels.
- With click sound effect when turning the rotation wheel
- No other parts for 3D printing are recuired.
Only a screwdriver is recommended for assembly.
Last update:
Please note: There are two screws. One fits the thread at the front, and one at the back because it's mirrored. This means you'll need to turn one screw forward and one backward to install it.
Please note that in my tests, the function worked for balls with a diameter of approximately 10-18mm.
Other sizes may not function smoothly. Tip: If it gets stuck, turn the wheel forward
and backward. And if it still gets
Boost Me (for free)
thank you!
Introducion
Please first carefully remove all supports
from the printed parts. Use the screwdriver
to remove the supports and for installing the
printed screws.
Some places where supports were can be
sanded with sandpaper if it bothers you.
Please note: There are two screws. One fits the thread at the front, and one at the back because it's mirrored. This means you'll need to turn one screw forward and one backward to install it.
Or download the Assembly_Instruction PDF
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (211)