Design Lamp (LED Lamp Kit-001) - Free 3D Print Model

Search models, users, collections, and posts

CloseEnoughMachineShop

Household>Decor

IP Report

Print Profile(3)

All

P1S

P1P

H2S

H2D

P2S

X1E

X1 Carbon

H2D Pro

H2C

X2D

A2L

Special print profile

Designer

26 h

2 plates

4.7(13)

Overhangs Special Profile 0.6mm nozzle, 0.12mm

Designer

28 h

2 plates

Special Print Profile for 0.6mm nozzle

24.2 h

2 plates

Open in Bambu Studio

Boost

682

2235

533

136

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

LED Lamp Kit Collection

Bambu Filaments

Select all

Matte Ivory White (11100) / Refill / 1kg

PLA Matte

PLA Matte

Description

Design Lamp (LED Lamp Kit-001)

This is a harmonic LED Lamp in a form of a pipe.

Good to know before printing

Important: Use my print profile! It is highly adapted for this print to work.
- If you have problems with overhangs, use a 0.6mm nozzle with 0.18mm layer height. You could also lower the nozzle temp by 5-10 degrees Celsius, but try a bigger nozzle first.
I used Bambu Lab PLA Matte, Ivory White and Desert Tan
Buy the LED Lamp Kit-001

Boost Me (for free)

Thanks for the support!

Membership

Join my membership for commercial license

Join

Comment & Rating (44)

@SlumpetGoku

Pinned by Designer

Print Profile

Special print profile

Great model thank you very much!!

The profile uploader has replied

Show original

@CEMS

Great! 👍

@NathanH2S

Hello, could you give me the reference for the colors you used? Thank you

Show original

@SlumpetGoku

Replying to @NathanH2S :

it's red PLA Plus from Bambulab ;)

Show original

@grrPOWscarface

best model ever😋

The designer has replied

@CEMS

Thanks!

@user_890231053

what filament is this?

@lucky.kronos

what filament is that?!

@About30cows

Boosted

Print Profile

Special print profile

the print quality of the base and lamp shade were absolutely incredible. I can tell there was a lot of work put into variable layer height and it shows. I’ve got two issues: 1) the light just isn’t very bright at all. I’m using bambu matte PLA bone white, and I’m not sure how much of a difference that makes but even in a dark room it barely puts out any light. 2) there’s some serious banding issues when the lamp is lit up. I’m not sure if switching to a 0.6mm nozzle will help, I don’t have one but I might order one to see, but yeah the two things make it difficult to actually use as anything other than a decoration. the design is stunning and the print profile is incredible so kudos, and if you have any info on how I can salvage it I’d love to hear it cause I’m obsessed with the design

(Edited)

The profile uploader has replied

@CEMS

I use the LED lamp kit from bambu lab and it lights up my print well. But I use bambu lab PLA matte. Im thinking about the banding… Maybe check the print settings so it doesn’t are inconsistent infill. Maybe use 100% concentric infill? 0.6mm nozzles are great for problems with overhang.

@About30cows

Boosted

Replying to @CEMS :

yeah that’s the weird thing, my flaming is also bambulab Pla matte and I’m also using LED kit 001. I just used the app so that I could use ask your settings a stock but I might pull it into the slicer and see what I can change

@About30cows

Boosted

Replying to @About30cows :

@CEMS Okay so I think I see the issue, because the walls are horizontally thicker at the top and the bottom, its generating more infill in those regions causing the banding. It might be less of an issue with filament that allows the light to shine through more, I might try with a different PLA, I think I have some Ivory White, but I wouldn't have expected it to be this dramatic

@Superbious1

The top part of the print is failing terribly, I have used the original print profile to print with 0.6 mm nozzle and 0.18 mm layer height and reduced temp to 200 degrees what should I do now to avoid this?

The designer has replied

@CEMS

Hi! I´m not exactly sure why you get this problem. Do you use Bambu Lab PLA Matte filament? Some defects due to to massive overhang is expected but not that much.

@Superbious1

Replying to @CEMS :

Yes it is PLA matte, ivory white, from bambu lab. but currently I am printing using your ‘special overhangs profile’ at 0.6 /0.12 mm layer height, let’s see how it goes. Thanks for responding though.

@CEMS

Replying to @Superbious1 :

Hope it goes well. I see that you even have problems with the threads. And the thread are easy to print even with 0.4mm nozzle. I wonder if there is some other problems.

@user_2333858668

Boosted

Print Profile

Special print profile

A truly beautiful lamp! The main body printed flawlessly; however, the globe exhibited some minor imperfections at the base

The profile uploader has replied

Show original

@CEMS

Try to print it 5 or 10 celcius cooler.

@CEMS

Try a 0.6mm nozzle with 0.18mm layer height

@Susuyes

Print Profile

Special print profile

Other Issues:Beautiful design but unfortunately I am unable to print the top part without very visible defects. I have tried lowering the temp 5, 10, 15 and 20 degrees. It improved a little but not very much. There is also a horizontal line that appears at the top part at the same spot (not printer related; tested on multiple printers) and the top finish is a bit messy. The bottom part prints flawlessly and looks amazing!

The profile uploader has replied

@CEMS

You should use a 0.6mm nozzle with 0.18mm layerheight for better overhangs

@CEMS

But the flaw at the top... I don´t know what to say about that. How does it look in the slicer in the preview tab? Almost looks like the nozzle crashed into the part and it moved. Make sure to try concentric infill pattern if its not enabled in the slicer. Is your filament 100% dry?

(Edited)

@Susuyes

Replying to @CEMS :

I will try that and let you know! thanks for responding

@Morfia

Awesome model :) Base is perfect, but the lampshade can't be printed cleanly, despite all your tips, I'm having problems - see pictures. Do you have a tip what could be the reason? Thanks and greetings

(Edited)

The designer has replied

Show original

@CEMS

So the 0.6mm nozzle with 0.18mm layer height didn’t help? If you have a 0.8mm nozzle it could help. But I never tried it.

@monorail

Boosted

Print Profile

Special print profile

ah beautiful made pla basic silk lume glow in the dark, thank you, beautiful

Show original

@user_788633101

Print Profile

Special print profile

fantastic lamp, super project..I d like to speak with you about this lamp, is that possible?!

@user_3381108538

Boosted

top

The designer has replied

@CEMS

Thanks!!

@grrPOWscarface

Hi @CEMS , I'd like to print this project for a friend's birthday. Regarding the top sphere, do you recommend a matte white pla or a clear PETG? Thanks in advance.

The designer has replied

@CEMS

I would use Pla Matte Ivory White with a 0.6mm nozzle at 0.18mm layer height

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

LED Lamp 001

Bambu Lab

82.7 k

8.4 k

LED Lamp - Kit 001

Andy’s Design

5.4 k

2.4 k

Moon Globe for LED Lamp 001

TBone_427120

44.2 k

11.8 k

Led lamp for KIT-001

Jarek

1.1 k

918