White Collar Poster Hueforge
Print Profile(1)
Description
Boost Me (for free)
I would greatly appreciate a boost if you enjoyed this print. Also, consider checking out my other Hueforges on my channel. Thank you.
Project: White Collar Poster Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.4mm and the Actual Depth is 2.2mm
NOTE: I would change the Wall Generator to Arachne. It takes a while for the slicing time, so I had to leave it on Classic for the upload. Arachne does take longer, but gives better detail on hueforges. (You can leave it on Classic and see if that works the same.)
The Model is 161.16x234mm in size. You can scale the X, and Y axes to fit your needs. (Make sure you DO NOT scale the Z axis)
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.1
PLA Elegoo Red Transmission Distance: 4.1
PLA Elegoo Yellow Transmission Distance: 5.6
PLA Elegoo White Transmission Distance: 5.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.
License
Comment & Rating (0)