3/4" NPT to GHT (garden hose thread) - Free 3D Print Model

Search models, users, collections, and posts

Part Time Pilot

Household>Garden

IP Report

Print Profile(1)

All

P1S

A1 mini

P1P

H2D

X1E

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 100% infill

Designer

1.5 h

1 plate

4.9(17)

Open in Bambu Studio

Boost

298

570

315

Released

Description

Two adapters for gardening project. ¾" NPT female to ¾" GHT female and ¾" NPT female to ¾" GHT male. This allows devices like venturi to connect in between hose and waterwand. Please rotate so the wide part is down and enable support.

Comment & Rating (27)

@user_614293300

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

Part Time Pilot...impressive 👏👏👏

The profile uploader has replied

@parttimepilot

Great, thanks.

@justinpmorrow

Boosted

Great model, i used your ¾" NPT female model and smooshed it with part of https://makerworld.com/en/models/1241816-female-garden-hose-fitting-with-hose-barb-adaptor#profileId-1262492 to make a replacement connector for my pond pump.

The designer has replied

@parttimepilot

I am happy it worked for you. Love this community. Thanks for the boost.

@user_2210637679

Having an issue. New to this and wondering if I'm doing something wrong. Printing with a Bambu Lab H2C using PETG. NPT threads seem fine. GHT Threads are to large in Dia. The Printed Female GHT threads fit onto a male GHT garden hose but are very loose. The printed Male GHT threads will not screw into a Female GHT garden hose because it's to large in dia. The printed male and female GHT work fine with each other. Any Ideas?

The designer has replied

@parttimepilot

No one has reported issue but here are few things to try. Try PLA if you have available. Also try scaling down the model by 1% or use 220grit sand paper on the thread. I am on vacation so can't try for few weeks.

(Edited)

@user_2210637679

Replying to @parttimepilot :

Bambu Lab H2C. I printed with PETG at 98.5% size. Male GHT end will now fit in an off the shelf Female GHT. The Female NPT will fit onto a male NPT but is a little snug but it now works for me. Not sure why this is happening.

@parttimepilot

Replying to @user_2210637679 :

I am glad it worked for you and thanks for the reply, it may help someone else.

@MomBrain247

Print Profile

0.2mm layer, 2 walls, 100% infill

They didn't fit exactly, but nothing that couldn't be fixed with sealing tape

The profile uploader has replied

Show original

@parttimepilot

please try scaling 1% next time you print.

@user_2926100516

Not US GHT to NPT….

The designer has replied

@parttimepilot

Yes 100% USA GHT to NPT. Plenty of people printed and are using it. Check your printer settings. Let me know if I can help in any way.

(Edited)

@Aces101011

Print Profile

0.2mm layer, 2 walls, 100% infill

fits well

@Jrrjr38

Print Profile

0.2mm layer, 2 walls, 100% infill

Printed nice, turned out good. Nice job.

@user_3118168306

Print Profile

0.2mm layer, 2 walls, 100% infill

printed good

@jeffrudzinski.p

Print Profile

0.2mm layer, 2 walls, 100% infill

Model worked. Fixed a hose I had with a slightly mismanufactured thread.

@user_3071292202

Print Profile

0.2mm layer, 2 walls, 100% infill

Functions as envisioned :)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.