France Street Plate Algeria Abd El Kader

Hi guys, other versions of this model will soon be availabale, let me know if you want a specific street plate and I will upload it for you guys.

To print , you can directly use the .3mf file or use the stl.

• The STL is a bit bigger than the X1C Plate so you need to rescale it as follow:
  • uncheck ‘’uniform Scale''
  • Set X at 90 % – Y at 90% and Z at 100% ( to keep same thickness)
• I did not use the AMS for the print so you need to follow the sequence to print in 3 colors
  • Set a pause at layer 16 and another one at layer 21 ( if you use a different scale please check my pictures so you set the pause at a different height layer)
  • First load black filament
  • At the first pause, switch to the green filament
  • Finally at the second pause, switch to white filament

Model size is 98g with Grid infill and a 15% density 

If you chose to have ironing , use the following settings 

• Top surface
• Rectilinear
• 50 mm/s
• 30 % ironing flow

I hope you'll enjoy this model !  

Here are the scale settings  :

-------------------------------------------

Here is the first pause you need to set  :

Here is the Second pause you need to set :