Search models, users, collections, and posts

Sure Shot Magnetic holder

alwayssaltyy
Tools>Organizers
IP Report

Print Profile(1)

All
P1S
A1
A1 mini
P1P
H2D
X1
X1E
X1 Carbon
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate
5.0(7)
Open in Bambu Studio
Boost
43
133
16
10
124
72
Released 

Description

First try at making something useful at work. i used 3 36mm 150lb magnets for this print. defiantly over kill but I've used mine and several coworkers have been using theirs for a few months now with no problems. printed out of PLA. Paused at layer 39 and 125 to be able to add the magnets into the print. 

 

magnets i used 

https://www.amazon.com/dp/B0CC5HC4NG?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1

break
cleaner
holder
break cleaner
sureshot
sure shot
mechanic
tool
orginaizer

Comment & Rating (16)

(0/1000)
@Rusty_U
Boosted
Thank you for a useful print. Can you tell me how to print it the top magnet keeps sticking to the print head and messing everything up.
(Edited)
0
Reply
@TheMuffinMannn
I used a small amount of quick set epoxy to hold mine into the model when printing on my ender, although the print head on my Bambu p1s is not magnetic so it was not an issue with that printer
0
Reply
@Rusty_U
Boosted
Replying to @TheMuffinMannn :
Thank you glued them down during the pause and worked great
0
Reply
@stryguy
Boosted
Mechanic son says it works great. First model I made where I printed the magnets inside which was cool to do. Other guys in the shop now want one.
The designer has replied
0
Reply
@alwayssaltyy
glad it worked out. I made a few for my co workers and they all have had no problem with them for the past year now.
0
Reply
@KadeGuyTool564
How are you supposed to get the magnet on the inside in without breaking it? Do you have to pause it put it in and then resume?
The designer has replied
0
Reply
@alwayssaltyy
yes the file should of all ready had the paused in but I can get you the layer level to pause when I get home tonight.
0
Reply
@Stainlessmag
Boosted
I have one of these made by the creator, it does exactly what it's meant to and does it well. Holds a full can without and movement at all.
The designer has replied
0
Reply
@alwayssaltyy
yes I seen those and was like I think I could make my own through tinker cad.
0
Reply
@Modsquad99
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
prints decent enough to work but the top magnet hole should be a hair deeper
0
Reply
@Mechanic_Prints
Print Profile
0.2mm layer, 2 walls, 15% infill
Prints great, holds great, could use some sort of design to it, just looks BLAH, but does exactly what it is supposed to
0
Reply
@hondatech
Print Profile
0.2mm layer, 2 walls, 15% infill
printed and turned out great. make sure you install the magnet in the correct direction when installing
0
Reply
@user_3190275235
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
amazing print print quality in the center off the u shape is ruff little bit (maybe the glue I use for the magnet) but work fantastic
0
Reply
@mysticsquash
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
@user_3626580370
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply

License

This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike

Related Models

Bambu Tools - Bambu Lab Tool Set -Disconnect Tools
Bambu Tools - Bambu Lab Tool Set -Disconnect Tools
K2_Kevin
58.5 k
14 k
2.0版 十二合一解压玩具 TWELVE IN ONE stress relieving EDC
Version 2.0 Twelve-in-One Fidget Toy Set
YEZAO
55.2 k
12.8 k
Bambu Spool
Bambu Spool
Bambu Lab
143.7 k
19.4 k
Scrub Daddy Holder V2. with drainage.
Scrub Daddy Holder V2. with drainage.
3D Print LT
85.6 k
9 k