300-315mm/12'' Saw Blade Wall Holder

A circular saw blade holder for 300-315mm blades, that mounts to a wall. Does hold 10 blades, with max 3.2mm thickness. The blade gaps are 3.5mm. 

The mounting holes are 5mm diameter and 20mm long. Due to the sunken mounting position a long bit is needed.

Blades can be taken out separately also from the back, when done carefully.

I removed the support structure after the print with a small screwdriver. 

Only use normal support in “Snug” style, if “default” is used, the removal of the support structure is very cumbersome.

Printing might cause some small issues on the interface between support and overhang.

160/165mm version can be found here: https://makerworld.com/en/models/1411112-165-160mm-6-5-saw-blade-wall-holder

216mm version can be found here: https://makerworld.com/en/models/1407897-216mm-8-5-saw-blade-wall-holder

250/254mm version can be found here: https://makerworld.com/en/models/1420278-254-250mm-10-saw-blade-wall-holder