user_2886540642

AMS - 0.4 Nozzle - 0.08 Layer

BeakerIRL

Bamingo Design

cover

classical-columns-bookmarks-3-4-01.jpg

classical-columns-bookmarks-3-4-02.jpg

classical-columns-bookmarks-3-4-03.jpg

classical-columns-bookmarks-3-4-04.jpg

classical-columns-bookmarks-3-4-05.jpg

plate_1.png

Technical Specifications:<ul><li>🔧 Print Settings:<ul><li>Print at 100% infill with a layer height of 0.08mm and a base layer height of 0.16mm</li></ul></li><li>🌈 Color Changes:<ul><li>Start with Black (Esun PLA Black)</li><li>At layer #8 (0.72 mm), switch to Gray (Esun PLA Gray)</li><li>At layer #10 (0.88 mm), change to White for the rest (Esun PLA Matte Milky White)</li></ul></li><li>📋 Assembly and Usage Tips:<ul><li>Alternatively, use our ready-to-print 3MF file—it automates these steps.</li><li>Don’t simplify the model and ignore the &#34;floating regions&#34; warning.</li><li>You can right-click on the model and select &#39;Split to Objects.&#39; to print them separately.</li><li>Adjust only X and Y dimensions when scaling and avoid changing in Z.</li><li>If you encounter stringing issues, you can use a heat gun to remove them.</li></ul></li></ul>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<ul><li>Elegant forms to mark your page with timeless beauty.</li><li>Inspired by Doric, Ionic, and Corinthian styles.</li><li>Two manual swaps — no AMS or MMU required.</li><li>Print Settings:<ul><li>Layer height: 0.08 mm with a base layer of 0.16 mm</li><li>Infill: 100%</li></ul></li><li>Color Changes:<ul><li>Start with Black (Esun PLA Black)</li><li>At layer #8 (0.72 mm), swap to Gray (Esun PLA Gray)</li><li>At layer #10 (0.88 mm), swap to White (Esun Matte PLA Milky White)</li></ul></li><li>Notes:<ul><li>A 3MF print profile is included for easy setup</li><li>Do not simplify the model (ignore floating regions warning)</li><li>Scale only in X and Y</li><li>Split objects manually by right-click menu</li><li>Use a lighter or a heat gun to remove stringing</li></ul></li><li>Want to sell prints? Check our profile for a commercial license.</li></ul>

Classical Columns Bookmarks

ASIA

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models