Search models, users, collections, and posts
Pin + Ring for INTEX POOL
IP Report
Print Profile(1)
0.16mm layer, 2 walls, 50% infill
Designer
45 min
2 plates
Open in Bambu Studio
Boost
42
123
8
5
73
50
Released
Description
Content has been automatically translated.
Rod and joint compatible with all INTEX “METAL FRAME” & “PRISM” tubular swimming pools
Rod Printing Instructions:
The rod must be oriented with the notch facing down.
At low speed, it can be printed without support, but support is strongly recommended to enhance the rod's strength.
A raft is highly recommended.
100% infill.
I recommend printing the rod in ABS or ASA, especially for outdoor use (sun, heat, weather).
PLA is not recommended; it can deteriorate quickly with UV exposure.
Joint Printing Instructions:
The TPU joint is not mandatory.
The important thing is that the pin/rod correctly locks the horizontal tube with the T-tube.
This prevents your pool from disassembling or “exploding”.
The joint is printed in TPU, without support and without a raft.
Feel free to provide feedback in the comments, share your photos, leave a like and a boost if you enjoyed it.
Happy printing everyone!
Epsilon
Boost Me (for free)
A free boost is always welcome. It’s a true support, thank you!
Documentation (1)
Other Files (1)
Buy_alternative.pdf
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (8)