J-15 Carrier-Borne Fighter - Assembly Version
Print Profile(3)
Description
Catalog => <Warship-Ship>-<Fighter-Aircraft>-<Vehicle-Tank>-<Aerospace>-<Miniature>-<Mecha>-<Weapon>-<Uncategorized>
Membership
J-15 Carrier-Based Aircraft - Assembly Version
(The model differs from the J-16 assembly version in that the J-15 features canards, a landing tailhook, and wings that fold upwards 90 degrees)
(Segmented and extensively employing snap-fit design significantly reduces printing and assembly difficulty)
(Radar, engine, cockpit, folding wings, landing tailhook, canards, landing gear, missiles… and more require assembly, offering endless fun)
Due to material shrinkage and printing precision limitations, sanding and applying adhesive may be necessary; apply firm pressure.
Remember to thoroughly clean the PEI build plate before printing, ensuring adequate adhesion and that the material is dry
The model uses 46 grams of material and takes 6 hours and 29 minutes to print.
Test printer: A1 mini -- low-temperature stabilized build plate, Bambu PLA, 0.12mm layer height, 2 walls, all acceleration settings at 1000 or less.
A brim is added by default; those confident in their printer and filament can disable it—I did.
My sincerest gratitude to all those who have followed, liked, downloaded, and boosted this project.
Assembly Instructions
!!!Important: Adhesive is required to attach the two fasteners to the airframe!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)