Wolf through the wall

Wolf breaking through wall - 
FOR THE BASE
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 3.12mm and the Actual Thickness is 3.04mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #8b4513 PLA Sunlu Chocolate  Transmission Distance: 4.5
    #edbb84 PLA Kingroon skin  Transmission Distance: 3.5
    #ffffff PLA sunlu white  Transmission Distance: 6.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #15 (1.28mm) swap to Chocolate
    At layer #23 (1.92mm) swap to skin
    At layer #29 (2.4mm) swap to white for the rest.

at layer 37 height modifier has been placed - keep to white 
at layer 682 swap to black