Bookmark, Monogram A. Hueforge
Print Profile(1)
Description
You do not need an AMS to change colours. At the layer where you should change colour, change to pause and manually change the colour when the print pauses.
Bookmarks need a clean plate to avoid any corners rising.
Project: Monogram A.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.64x152.46mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.5mm and the Actual Depth is 1.4mm
Filaments Used: I do not know the TD numbers.
PLA Black - Creality Ender Series
PLA Blue - Polymaker PLA+
PLA White - PolyTerra PLA+
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue
At layer #13 (1.12mm) swap to White for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)