SWORKz 35-4 EVO SERIES Front Shock Tower Guard
Print Profile(1)
Description
SWORKz S35-4 EVO series 1/8 off-road car front shock tower guard, divided into two parts, for the protection of the upper part of the shock absorber bracket and the top of the shock absorber cap. If your track surface is relatively hard, and you want to reduce the damage to the front shock absorber in case of rollover accidents, you can use this protection kit as needed. Installing the shock absorber bracket protection requires 2 M3*10 countersunk screws and 2 M2.5*10 round head screws. To install the shock cap protection, do not use the large diameter flat screws from the kit. You can use M3*10 round head screws with washers to install the shock absorber, and remember to use threadlocker.
!!! Please note that the shock absorber bracket protection is only for use when the shock absorber is installed in the inner 4th hole position and is not compatible with other 3-hole installation configurations !!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)