AI MOSS Compatible with Xiaomi Dafang Camera

First, I want to thank "王优秀" for sharing the model file! Without this great creator, this modified model might not exist. This model has been modified and some small details removed to facilitate better printing results and fewer visible supports. The internal structure has been significantly altered. Several joints of the model are rotatable. You can pose the model according to your ideas to let the camera capture the desired scene. The arm rotation will be accompanied by a clicking sound and angle control effect. However, this rotation is unidirectional, so I used conductive slip rings internally to ensure continuous circuit connectivity. The main body uses springs to create a damping effect, achieving stop-and-stay functionality. The wiring inside the model is also very simple. For details, please refer to the assembly documentation. The lighting can be independently controlled with a switch. The switch part is also hidden inside the model, completely without affecting its appearance or functionality. I personally think the design of this switch part is quite interesting. Additionally, it's important to ensure that the LED bead voltage matches the output voltage of the camera's power adapter, otherwise, the LEDs might not light up or could be directly burned out. The camera is constantly powered. An STP format file is also included. Friends with the ability can further modify the model themselves.