Artemis and Iphigenia - Diana - The Huntress

This model is based on the sculpture Artemis and Iphigeneia, housed at the Statens Museum for Kunst and shared via the Scan the World project. The composition depicts a pivotal moment from the Greek myth in which Artemis intervenes to spare Iphigeneia from sacrifice, replacing her with a deer. 

I began with an .stl file of the original scan and imported it into Bambu Studio. I optimized the infill and support settings to reduce the amount of support interfaces. The model is scaled for maximum size on A1, X1, and P1 printers.

Printed in Elegoo Marble PLA using the Generic High-Speed PLA profile. After printing, I used a file and fine-grit sandpaper to smooth out areas where supports were removed, preserving the intricate surface details while improving the finish.

Note: Tall prints can lose adhesion in the final moments. Please wash your build plate prior to printing. Or consider scaling down 10%. I've also had really good luck using BIQU Cryogrip Pro Frostbite build plates.