Small Pumpkin Layered Fidget (3 Styles)

These pumpkin fidgets are always a big hit at halloween 🎃  This upload is for the Small Layered Fidget Pumpkin but they come in three sizes: small, large and tall - and each size comes in 3 styles: with an embossed face, a cut-out face or no face.

Dimensions of Small Pumpkins: 2 in. x 1 ⅛ in.

Layer Height 0.2mm 

PLA works great 

15% Infill 

Supports needed for the pumpkins with the cut-out faces

If you would like to make these a multi-color print but don't have a multi-color printer you can insert a pause print to change the filament at layer 141 (layer height 28.2) to change the filament color.

My 3mf file includes the following print profiles: 

Print plate #1 (Small Pumpkin: face_no supports needed): 2 colors, orange & green 

Print plate #2 (Small Pumpkin: face cut-out_supports needed): 2 colors, orange & green and supports added 

Print plate #3 (Small Pumpkin: no face): 2 colors, orange & green

Note: For some machines (like a Prusa) I recommend that you turn on the “Detect thin walls” setting (in Prusaslicer go to > Print Settings >Layers and Perimeters > check the box 'Detect Thin Walls). This will ensure that all the vertical lines on the pumpkins print out well. On my Bambu printer I did not need to do this.

My designs are free for personal and non-commercial use. If you would like to sell them for commercial use head to my page on Thangs 👉 https://thangs.com/designer/3DPmom to get more information about a commercial license.

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!

Have fun printing!