Jason and Lucia Hueforge (GTA VI)
Print Profile(1)
Description
Boost Me (for free)
I would greatly appreciate a boost if you enjoyed this print. Also, consider checking out my other Hueforges on my channel. Thank you.
Project: GTA VI Hueforge (Jason and Lucia).hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 234x131.53mm in size. You can scale the X, and Y axes to fit your needs. (Make sure you DO NOT scale the Z axis)
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.1
PLA Elegoo Red Transmission Distance: 4.3
PLA Elegoo Yellow Transmission Distance: 4.7
PLA Elegoo White Transmission Distance: 3
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
License
Comment & Rating (0)