Search models, users, collections, and posts

IP Report

Print Profile(6)

All

P1S

P1P

X1E

H2D

A1 mini

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

[Strength] 0.2mm layer, 3 walls, 15% infill

7.5 h

3 plates

5.0(21)

Optimized POOP letters, 0.2mm layer, 2 walls, 15% infill

7.6 h

3 plates

5.0(6)

Size: Charmin Wide (Costco) .16mm layer, 2 walls, 10% infill

20.3 h

1 plate

5.0(6)

Round P - Single Plate

8.1 h

1 plate

5.0(3)

Click to see more

Open in Bambu Studio

Boost

666

2122

943

519

Released

Description

Summary

As the name suggests, a humourous toilet roll shelf that spells out the word 'POOP'.

The files for the letters P and O are provided.
Print 2x 'P' and as many O's as you want.
I've included 2 versions of the 'P', one has a squared descender and the other has a rounded descender so you can choose which style you prefer.

I printed the 'O's first with a 7% Gyroid infill, but when slicing the 'P's this seemed like too much material, so I lowered that to 3% and it printed fine with 3 walls and 4 top/bottom layers. If I were to do it again, I'd use 3% Gyroid on the 'O's as well.

For those interested in material use per letter (assuming 3% infill etc mentioned above):
Rounded 'P' - 97g - 32.63m
Square 'P' - 100g - 33.51m
'O' - 64g - 21.31m

The dimensions are:
'P' - 116 x 110 x 110mm
'O' - 116 x 58 x 110mm

Wall mounting is achieved by 2 screws for each letter. The screw holes are countersunk and should accommodate most screws.

-Update-
For those with a print bed large enough, I've created a version that is one model rather than the individual letters. You'll need space for 455x110x110mm. Again, there's a rounded and square version.

The design of this project is my own, however the idea was seen elsewhere but I couldn't find a design I was happy with, or able to accommodate on my printer.

Print Settings

Printer Brand:

Creality

                                            Printer:                      
Ender 3 Pro

Rafts:

                                            Supports:                      
No

Resolution:

0.2

                                            Infill:                      
3% Gyroid

Filament: Sunlu PLA
Matte White

                    
                        Notes:                     
You may want to increase the infill percentage in the area around the mounting screw holes to add some extra strength and prevent the print from being crushed if you over-torque the screws when mounting to the wall.
As it is a bathroom item, I'd advise spray painting/lacquering the prints for ease of cleaning.