Disposable Dispensing Tip for Superglue Bottles

Who hasn’t experienced it – with larger superglue bottles, the dispensing tip often gets clogged, and the remaining glue has to be thrown away.

Here are two versions of a disposable dispensing tip with a 1 mm diameter.
Ideal for thin superglue, as commonly used in RC model building.

Version 1:
Screw-on cap for bottles with a thread of approximately 18 mm in diameter and a thread pitch of 3 mm.

Version 2:
Push-on tip for bottles with an opening diameter of around 13.5 mm.

I achieved the best print results using a small 0.2 mm printer nozzle.