Eureka Mignon tilt base incline - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

PrintingHAL

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

P1P

X1 Carbon

X1E

P1S

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.9(46)

Open in Bambu Studio

Boost

348

721

583

Released

Description

☕ Eureka Mignon (all modells) Coffee Grinder Base Remix
🛠️ This remixed model is optimized to save ⏱️ time and 🎞️ filament – without compromising on stability!
📉 Reduced volume = faster print, less waste
🔩 Still super sturdy and functional
📐 Adds just the right tilt for better coffee grounds flow
🖨️ Quick print – perfect for daily coffee lovers!

Comment & Rating (62)

@user_1713690579

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits perfectly! Thanks!

The profile uploader has replied

@PrintingHAL

beautiful 👍

(Edited)

@PrintingHAL

try this Print for your hopper: https://makerworld.com/models/1220909

(Edited)

@grabowskil

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The spout points perfectly downwards. I printed it in PETG-CF, it came out wonderfully

The profile uploader has replied

Show original

@PrintingHAL

Great print, have fun with it

Show original

@grabowskil

Boosted

Really good model, thanks I printed it in PETG-CF and designed a drip tray for it: https://makerworld.com/en/models/2118975-tray-for-eureka-mignon-tilt-base-incline

(Edited)

The designer has replied

Show original

@PrintingHAL

Great! Left a like 👍

Show original

@juniper_a1

Print Profile

0.2mm layer, 2 walls, 15% infill

Flawless print. great settings. The grinder is heavy but this feels like it'll hold up just fine. cut out at the back door the power cable is a nice touch.

The profile uploader has replied

@PrintingHAL

nice print 👍 have fun with it

@Kusi81

Print Profile

0.2mm layer, 2 walls, 15% infill

Beautiful print 😁 Printed in Bambulab ABS and worked like a charm.

The profile uploader has replied

@PrintingHAL

nice and clean 👍

@pheno_minal

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect tilt and fit!

@Fabulicious187

Print Profile

0.2mm layer, 2 walls, 15% infill

The mill sits stably and cleanly on it. Looks great and the print ran without problems

Show original

@ec8or

Great stuff! Easy to print with PLA. Saving filament is very important and you did a very good job. Thanks! I created my own version of a matching tray. https://makerworld.com/de/models/2232244-eureka-mignon-tray-for-tilted-base

@Haari

Print Profile

0.2mm layer, 2 walls, 15% infill

wonderful design ♥️

@xahv

Print Profile

0.2mm layer, 2 walls, 15% infill

printed well....the description says for all Eureka grinders.... I have the one with the integrated scale where you put your portafilter in to dose.....the angle and the weight of the portafilter makes it tip over every time when the grinder starts....also the clearance between the portafilter and the counter is very close. I can not touch the portafilter to keep it stable during the grinding because the unit stops grinding because the scale reacts to me holding it.

@AtesAtesAtes

Hi, thanks for the info. At the time of creation, the version with the integrated scale did not exist or I was not aware of it. But I can't imagine what your problem is right now

Show original

@xahv

Replying to @AtesAtesAtes :

because i have to have the portafilter inserted when the grinder starts to grind the weight is too much to the front and the grinder will fall over. I cannot touch the grinder or portafilter when in operation to prevent this because it screws up the scale's reading and the grinder stops grinding automatically. So it does not work for this grinder as it will fall over due to the weight leaning front and not being able to use any pressure to stabilize it as the grinder will stop working automatically due to the scale....I hope this is clear.

(Edited)

This remix is based on

Eureka Mignon Specialita Base Tilt

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.