Pringles Chips Slider Tray with a Functional Lid
Print Profile(4)
Description
I came across this cool idea online, but the models I found were either too small for a regular-sized chips can or the lid didn’t work properly. So, I jumped into CAD, designed my own, and now I’m sharing it with all of you!
This is a chips can slider tray with a lid that fits the Pringles chips can, making it super easy to pull the chips out. No more digging around with your fingers for the last few pieces.
It has a bottom stand, so it won’t roll away when you place it on a table or the couch while watching your favorite show.
The lid is sturdy enough to stay closed even if you accidentally knock over the can, and it seals properly to keep everything fresh.
I set up the print profile to use 100% infill because I like my prints to be heavy-duty, so they can be handled without worrying about breaking. I test printed ours in both PLA and PETG, and they turned out great!
Boost Me (for free)
If you like this model consider giving me a boost to support my work! Thank you so much! <3
Print settings i used for Basic PLA:
Layer height: 0,24mm
Speeds:
Outer wall: 150mms
Inner wall: 200 mms
All the infils: 230mms
Top surface 130 mms
Strenght:
Walls: 2
Infil density: 100%
Infill pattern: Rectlinear
It takes only 1h35min to print one with provided settings.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1539)