Ventilation for Driver and Passenger in Campervan
Print Profile(2)
Description
Hello camping friends, here are ventilation inserts for the Fiat Ducato/Citroen Jumper or the Boxer.
The inserts were designed so that you can simply place them into the cab windows and close the windows. This way, your campervan is locked yet still ventilated. Insect protection has also been considered.
Of course, the print file had to be cut to fit the print bed. Use some glue for assembly. To remove the supports, use small pliers; it worked very well for me.
In the pictures, they are on a Jumper MJ2024.
Printed in PETG HF as the camper hopefully often stands in the sun ;-).
I wish you a lot of fun printing and a wonderful camping time.
Update 06/14/2025
A print profile with smaller, steeper roofs has been added. ATTENTION: This profile requires significantly more support structures to be used and removed.
Update 02/27/2025 Ventilation for connecting an Ecoflow Wave available (Link)
Membership
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (263)