Search models, users, collections, and posts
Ubiquiti AP or Camera hole cover plate
IP Report
Print Profile(1)
0.12mm layer, 2 walls, 15% infill
Designer
43 min
1 plate
Open in Bambu Studio
Boost
21
65
3
0
52
15
Released
Bill of Materials
Bambu Filaments
Select all
Description
- This is a round piece of plastic, that you will print out, to cover up the holes in your wall or ceiling when you decide to move your Ubibuiti devices around to find better camera angles, access point locations or the like, and then it leave the hole for the ethernet cable and the 4 holes from the drywall anchor and screws in your wall or ceiling.
OD is 3.75"
Studs are 0.500" offset from OD of disc so they'll cover up all the holes you drilled everywhere
Studs are 0.260" diameter, fit snug into the anchor hole if you drilled ¼" when installing them
I printed out of PETG HF because it is what I had, I suspect it'll be fine out of PLA or whatever other filaments you have laying around
Prints completely fine with no supports or adjustments as I have it in the provided file for you to download. By reading this you agree to give me a like, share and boost and to send me a link to your homelab gear to see if I approve.
Assembly Guide since I have to put one for people to consider giving me beer money:
1: You push the thing in the holes
2: Tell the wife you worked hard today
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)