Hueforge Pokemon, Garados
Print Profile(1)
Description
Project: Gyarados Pokémon.hfp
Printed with 100% infill, a layer height of 0.08 mm, and a base layer of 0.16 mm
The model measures 180 x 180 mm
Higher layer heights are permissible below the minimum depth of 0.48 mm
Maximum depth is 2.2 mm, actual depth is 2.3 mm
Filaments Used:
PLA PolyLite Black, Transmission Distance: 0.3 mm
Bambu Lab Matte Marine Blue PLA, Transmission Distance: 0.5 mm
PLA PolyLite White, Transmission Distance: 5 mm
PLA Standard White, Transmission Distance: 5 mm
This print utilizes four distinct filaments
Switching Instructions:
Begin with Black
Switch to Marine Blue at layer 9 (0.8 mm)
Switch to White at layer 12 (1.04 mm)
Switch to White for the remainder at layer 22 (1.84 mm)
Project: Gyarados Pokémon.hfp
Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.16 mm
The model is 180 x 180 mm
Printing with higher layer heights is possible below the minimum depth of 0.48 mm
The maximum depth is 2.2 mm, and the actual depth is 2.3 mm
Filaments Used:
PLA PolyLite Black, Transmission Distance: 0.3 mm
Bambu Lab Matte Marine Blue PLA, Transmission Distance: 0.5 mm
PLA PolyLite White, Transmission Distance: 5 mm
PLA Standard White, Transmission Distance: 5 mm
This print employs four unique filaments
Swap Instructions:
Begin with Black
At layer #9 (0.8 mm), swap to Marine Blue
At layer #12 (1.04 mm), swap to White
At layer #22 (1.84 mm), swap to White for the remaining layers
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)