Search models, users, collections, and posts
Top Rail Fence Post Standoff for 11mm Coax
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 18% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
10
13
0
1
12
4
Released
Bill of Materials
Bambu Filaments
Select all
List other parts
- M5x16mm Socket Head Screws x 1: https://amzn.to/4kdix8S
- M5 Stainless Steel Flat Washers, 5mm ID, 10mm OD, 1mm Thickness x 1: https://amzn.to/3FmAEu0
- M5 Threaded Inserts, M5x6x7 Heat Set Insert x 1: https://amzn.to/3Z2aHXo
- Zip Ties, 8 Inch Heavy Duty Self-Locking Nylon Zip Ties x 1: https://amzn.to/4mvaOVv
- Heat Insert Tool with Storage x 1: https://amzn.to/3Z36pyO
Description
This model is a standoff for top rail fence posts and antenna feedlines that are 11mm in diameter or smaller. I have an outdoor meshtastic node that I wished to move the feedline from the antenna off the top rail fence post mast I was using. While not mandatory, it was just something I wanted to do and couldn't find a suitable standoff, so I modeled this one and have put it into use.
The piece with the channel for the feedline received a brass heat insert to give the m5x16 bolts something to screw into other than plastic. There is also a channel underneath where the feedline rests for a zip tie to secure the feedline to the standoff. This channel should accept a zip tie no larger than 5mm wide and 1.5mm thick.
List other parts
- M5x16mm Socket Head Screws x 1: https://amzn.to/4kdix8S
- M5 Stainless Steel Flat Washers, 5mm ID, 10mm OD, 1mm Thickness x 1: https://amzn.to/3FmAEu0
- M5 Threaded Inserts, M5x6x7 Heat Set Insert x 1: https://amzn.to/3Z2aHXo
- Zip Ties, 8 Inch Heavy Duty Self-Locking Nylon Zip Ties x 1: https://amzn.to/4mvaOVv
- Heat Insert Tool with Storage: https://amzn.to/3Z36pyO
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)