Q-Version Shenzhen Airlines Airplane - A350 - Sunglasses Dude

Q-Version Shenzhen Airlines airplane model

Designed as a snap-together version, Bambu Lab PETG can be directly assembled without glue.

For other filaments, please use glue as needed.

Printing notes:

1. The first plate is the tail section and vertical stabilizer. Multi-color layering has been set up, allowing you to directly print the fuselage color stripes and the logo on the vertical stabilizer.

2. The second plate includes the large wings, engines, and other white parts. Manual supports have been set up; simply print and remove supports carefully to avoid breakage.

3. The third plate is the sunglasses section. Print this last using black filament. Print the second plate first to prevent the black filament from contaminating the white parts.

Assembly steps:

1. Insert the engines into the large wings.

2. Attach the two vertical stabilizers together and insert them into the tail slots of the fuselage. Insert them diagonally forward first, then press them into the rear.

3. Insert all remaining parts onto the fuselage.

Different filaments have slightly different shrinkage rates; generally, no sanding is needed for tight snap-fitting.

If necessary, use sanding or glue as needed.

Thank you.