DEEPER QUEST AKKUBOX

This robust and flexible battery case is specifically designed for the safe storage of spare batteries for the Deeper Quest bait boat. Its 68D Shore hardness TPU construction ensures greater strength than conventional TPU enclosures while remaining impact and vibration resistant.

A ventilation slot on the top allows sufficient air circulation, preventing complete sealing and reducing heat buildup. While not fully waterproof, the case offers protection against splashes and dirt.

🔹 Features & Benefits:
✅ Precise fit for [Deeper battery set bait boat Quest] – Secure hold without wobbling
✅ TPU 68D material – Higher stability than standard TPU, yet flexible
✅ Top ventilation slot – Prevents heat buildup and ensures air exchange
✅ Splash-proof – Not waterproof, but resistant to moisture
✅ Optimized for Bambu Lab AMS – Perfect for TPU printing with the AMS system
✅ Compact & lightweight design – Ideal for transport & storage
✅ Easy printability – No support needed, optimized print orientation
✅ Mounting points – For mounting in the bait boat or on accessories

📦 Package Contents:
✔ 3D print file in 3MF format
✔ Optimized print parameters for Bambu Lab AMS
✔ Simple instructions for scaling & adjustment

🚀 Important Notes:
🔹 Batteries not included – Digital print file only!
🔹 Model designed for TPU 68D – Not recommended for PLA or PETG!
🔹 Case is splash-proof, not waterproof.

⚠️ Disclaimer:
This model is designed for private use. The seller assumes no liability for failed prints, damage to printers, improper use, or damage to batteries. Use of this 3D print file is at your own risk. Ensure the model meets your battery requirements and is printed only with suitable materials.

3D PRINTING SETTINGS

📐 Technical Details:
Material: TPU (68D Shore hardness for extra resilience)
Dimensions: approx. [177] x [53] x [103] mm
Wall thickness: [2.5] mm for optimal flexibility & stability
Infill: 20 % for a good balance between stability & weight
Print technology: FDM with Bambu Lab AMS support
Nozzle: 0.4 mm for precise details
Layer height: 0.2 mm for optimal print quality
🖨️ Print Recommendations (Bambu Lab AMS optimized):
Printer: Bambu Lab X1C / P1S / A1 with AMS
Material: TPU 68D for a stable, yet slightly flexible case
Nozzle size: 0.4 mm
Layer height: 0.2 mm
Infill: 20 % for optimal stability and weight
Speed: Reduced for improved layer adhesion (30–50 mm/s recommended)
Temperature: 220–240 °C (depending on TPU manufacturer)
Bed temperature: 35 °C (optimized for smooth PEI plate)
Cooling: 20–40 %, to avoid delamination
Print bed: Smooth PEI plate recommended for optimal adhesion