Armadillo Snack Box (print-in-place) - Free 3D Print Model

Search models, users, collections, and posts

LoboCNC

Household>Decor

IP Report

Print Profile(4)

All

X1 Carbon

H2D

P1P

A1 mini

X1E

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

For single nozzle color switch (X1, etc)

Designer

3.5 h

1 plate

4.6(159)

For H2D Dual Nozzle Color switch

Designer

5 h

1 plate

4.6(16)

Four @ 87.58% Mono Color (No Supports Needed)

11.1 h

1 plate

4.8(9)

single color

3.6 h

1 plate

4.3(32)

Open in Bambu Studio

Boost

3534

8012

332

159

4.7 k

2.1 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Description

What's the best way to make friends and influence people? Serve them snacks! Inspired by Mako Designs' Folding Basket, this print-in-place snack box curls up like a couple of cuddling armadillos when closed. It will stay closed by itself, but using optional magnets (two 8mm dia x 3mm thick that are glued in place) lets it close with a satisfying snap.

The 3MF file for the X1 (which should work with all Bambu printers) has a color switch at 2mm to add nice accent stripes. The 3MF file for the H2D prints each cover section with alternating colors.

Note that after printing, the edges of each cover section have a small tab brim that needs to be clipped away. And after printing, it'll take just a little wiggling and prodding to get each cover section freed up. (Note the clearances between the sections is 0.3mm, so you'll need dry filament and a well tuned printer.)

box