Bykski Radiator End Caps - 360mm x 60mm Radiator
Print Profile(1)
Description
I wanted to change the color of my radiator and also cover up some dents. Thes fit right over it and i didn't even need double sided tape but you might need a thin layer on each end. You can possibly scale the size up or down to fit smaller or thinner radiators. They do not interfere with the case or the fans or the fittings.
I printed with bambu pla matte
i wrapped the sides of the radiator in Cricut vinyl made for cricket cutters. Doimg all of this will not affect your temperatures or efficiency of the radiator. The radiator also does not get anywhere close enough to melt pla either so its safe to use pla. If your radiator gets hot enough to melt pla, you have serious issues lol. Melting point of pla is 150c or so and the maximum temp your radiator surface temps will ever be is maybe 60c but usually much much lower!
Usually the surface temps of the radiator are far lower than your max core temp of the gpu/cpu die.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)