Large, sturdy box (234 x 255 mm; various heights)

-------------------------------------------------------------------

UPDATE

I have added a second print profile that contains the lid with a foldable carrying handle. I hope you like it!

To secure the handle, 2 M3 x 40mm screws with nuts are needed

-------------------------------------------------------------------

Hello everyone again!!!

I have created a very robust and large toolbox to store all those accessories from our 3D printing workshop or any type of object we wish. For me, it's the ultimate box!!!🤣🤣 

And it's super robust!!!

The print profile is composed of several plates:

Plate 1: Latches

Plate 2: Box (127 mm height) (Optional, choose one)

Plate 3: Lid

Plate 4: Label (Optional). With editable text using Bambu Studio

Plate 5: Box (107 mm height) (Optional, choose one)

Plate 6: Box (147 mm height) (Optional, choose one)

To join all the parts, you need 6 steel pins of 3 x 40 mm

The pins fit very snugly to stay fixed, so you will need to use a hammer to put them in place. You may need to ream the holes with a 3mm drill bit.

The box closes very snugly, preventing dirt from entering from the outside. Additionally, it has a small lip that allows the box and lid to fit perfectly. The latches are very tight for an ultra-strong closure (it closes with a satisfying click)

The external measurements are 234 mm (width) x 255 mm (depth). This is at the most extreme parts, considering that the hinges and latches protrude slightly. 

Regarding the internal dimensions, the box measures 216 mm (width) x 216 mm (depth). The height will vary depending on the box you choose to print.

And more or less, that's all I can say about the model. 

I hope you like it and find it useful. 

P.S. If you print it, I encourage you to comment on your impressions about the model, upload photos of the result, and help me with a boost to continue creating more models