Shortwave Antenna Open Source Project - GP Antenna Base V1
Print Profile(1)
Description
GP天线底座
上下需要用M10热熔螺母连接拉杆及地插，M头底座需要用M3热熔螺母固定
侧面地网使用4mm香蕉头母头热熔进去
香蕉头母座和地插之间使用线缆或者焊锡连接均可
GP Antenna Base
M10 heat-set nuts are used at the top and bottom to connect the telescopic whip and the ground spike. The SO-239 connector base needs to be secured with M3 heat-set nuts.
On the side, a 4 mm banana socket (female) is heat-set in place for the ground radial connection.
The banana socket and the ground spike can be connected using either a wire/cable or by soldering.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)