Medicine Cabinet Pills Tablets

I needed a medicine cabinet of a specific size (Height: 375 mm Depth: 118 mm Width: 250 mm), so I fired up Fusion and started designing.
Everything except the two magnets (Neodymium d=5.91 h=2.5 mm) is 3D printed.
Everything was printed using Polyterra PLA.

Assembly:
1. Glue Door 1 and Door 2 together (e.g., HG liquid weld)

2. Glue Body 1 and Body 2 together (e.g., super glue)

3. Screw the handle into the hole provided.
4. Screw the first hinge to the door

5. Insert the second hinge including the spacer into the body. It is best to mount the spacer at the bottom.
6. Hold the door against the hinge from the outside and screw in the last two screws.

7. If desired, two neodymium magnets can be glued in.

I would print the threads with a maximum layer height of 0.24 so that they still turn reasonably well.