Universal Length Wall-Mount Filament Rack

Universal Length Wall-Mount Filament Rack 

Here's a simple solution to get your filament organized! Designed to be super strong and efficient, these brackets use steel ~20mm (3/4") closet rod that can be found at any home store! I chose rods over wooden dowels for their strength, as that's what they're designed for, and they look great too! 

Each bracket prints in under 2.5 hours and uses only 130g of filament!

Installation is easy!

They mount using two screws each; I recommend screwing into studs… use drywall anchors at your own risk. The length is adjustable to what ever size you want, just find your studs, mount one bracket, cut your closet rods to fit, level and mount the last bracket! You can also do a super long continuous run (the rods are available up to 8' length), using the included optional center bracket which slips onto the rods for positioning anywhere you need within the span. I recommend using the center support for anything over 32-36" in length, otherwise just the end ones will be fine. 

Here is the rod I purchased, it is available in different lengths to suit your needs:

https://www.homedepot.com/p/Everbilt-96-in-Regular-Duty-Closet-Rod-90207/314183875

Enjoy! 

-Rob SGW