Bambu Lab H2D, H2S, H2C Hula Anti Vibration Feet
Print Profile(1)
Description
Boost Me (for free)
You like it? Boost it!
I was always very enthusiastic about the Hula System. I had it on all my Bambu Lab printers
I also always had the problem that the printers on the cabinet would often amplify each other's vibrations (4 printers running at full speed), which sometimes led to a reduction in print quality
Unfortunately, I couldn't find a Hula for the H2D. So I built a quick and simple version myself
An H2D Hula Adapter
This simply uses the original Hula System, and instead of the normal connector to the printer, my part is used. Of course, the adapter can also be used with an existing Hula System. Just print it and replace the one part
Link to the original: https://makerworld.com/en/models/417509-hula-v1-0-anti-vibration-feet-for-3d-printers?from=search#profileId-502144
The H2D can simply be placed on top of it without having to remove the original feet. I also tested the direct connection variant, but I achieved better results this way
I've now logged about 100 hours of printing with the system, and it works perfectly. Print quality has also slightly improved
By drastically reducing the printer's vibration, the slight layer shifts have visibly decreased
ATTENTION! After installing a Hula System, a full calibration must be performed again to achieve good print results
I hope you like it as much as I do :D
Here is my version for the Snapmaker U1
https://makerworld.com/en/models/2059361-snapmaker-u1-hula-adapter#profileId-2223319
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (116)